EASYWARM HotPV
 

HotPV™ Arrays

Auckland Hot Water Array One

Dot point 

Auckland Example One:

  • Array is 2.25kW Hyundai facing due north with 15 deg tilt, connected to the bottom element of a 225 litre high pressure dual element cylinder.
  • The daily output is shown in left hand graph and generation for 5 Dec 2013 in the right hand graph - rainy day in Auckland in the morning.
  • Commissioned: 6 March 2013.
 Auckland Hot Water Array Two

Dot point 

Auckland Example Two:

  • Array is 2.7kW Hyundai facing NNE with 10 deg tilt, connected to the bottom element of a 225 litre high pressure dual element cylinder.
  • The daily output is shown in left hand graph and generation for 23 Nov 2013 in the right hand graph - cloudy day in Auckland in the morning.
  • Commissioned: 15 January 2013.
Auckland Hot Water Array Three

Dot point 

Auckland Example Three:

  • Array is 3.6kW Solyndra flat roof array, tubes aligned north/south. The array is supplying an open vented dairy cylinder heated to above 82degC.
  • The daily output is shown in left hand graph and generation for 23 Nov 2013 in the right hand graph - the cylinder that the array is heating topped out and the array turned off. The array came back online after washdown just before afternoon milking commenced.
  • Commissioned: 21 December 2012.
Victoria Hot Water Array One

Dot point 

Victoria Example One:

  • Array is 1.85kW Aleo facing due west with ~20 deg tilt, connected to the bottom element of a 180 litre dual element solar cylinder.
  • The daily output is shown in left hand graph and generation for 1 Dec 2013 in the right had graph - very sunny afernoon in northern Victoria.
  • Commissioned: 5 July 2013.

Contact us via email>>
(opens new window)